October 13, 2026 -- After fourteen years of research in the Hanson Lab at QuTech, an experimental research line into open microcavities for diamond colour centres recently came to an end. Five generations of PhD researchers worked with and further developed the platform and its experimental setup. But rather than putting the equipment into storage, the team looked for a research group that could continue to make use of it.

That opportunity was found at the Karlsruhe Institute of Technology (KIT) in Germany. The newly started group of Tina Müller at the Institute of Applied Physics works with solid-state quantum emitters, including quantum dots at telecom wavelengths, making the setup well suited to their research. The complete experimental system was therefore prepared in Delft, transported to Karlsruhe and installed in its new laboratory in the KIT physics tower.

A flexible but sensitive platform

At the centre of the setup is a fibre-based open microcavity platform, cooled in a closed-cycle cryostat to temperatures below 10 Kelvin. The main advantage of such a cavity is its wide spectral tunability. By adapting the coating of the mirrors, the platform can be made compatible with different types of quantum emitters and experiments.

This tunability also makes the system technically demanding. Open microcavities are highly sensitive to vibrations, reducing their performance, especially in a noisy, cryogenic environment. Over the years, considerable effort went into reducing the vibration level and creating sufficiently stable experimental conditions, finally approaching a passive stability of 25 Picometer (roughly the size of a single Helium atom).

As a result, the setup represented more than the individual pieces of equipment from which it was assembled. Its performance depended on how the complete system had been engineered and optimised. Transferring it to another laboratory therefore required careful preparation.

Preparing the move in Delft

The first stage was to make the complete system ready for transport. Cables were labelled, equipment was collected and the experimental chamber was prepared so that it could remain under vacuum during the transport. The team also prepared the control code needed to operate the setup in Karlsruhe.

The equipment was then packed into boxes and secured on pallets. Once everything had been prepared, the actual transport was relatively straightforward: the setup was shipped from Delft to Karlsruhe using a standard shipping company.

For a system that had been assembled and refined over many years, however, successful transport was only part of the process. The main question was whether it could be reinstalled in a different laboratory while maintaining the performance achieved in Delft.

Recommissioning the setup at KIT

In Karlsruhe, the equipment was installed in a new and initially empty laboratory. The team rebuilt the system and began testing it soon after arrival. Within one week, they had completed a test cool-down and carried out measurements of the vibration levels. The results showed that the setup performed similarly to how it had in Delft.

This was particularly relevant for the cavity, where controlling vibrations is an important part of achieving stable operation. The measurements confirmed that the system had successfully made the transition between the two laboratories. With installation and initial testing complete, the setup can now be used for new measurements at KIT. The transfer keeps a specialised experimental platform in active research use after the research line for which it was originally developed has concluded.

Fourteen years of work in Delft have resulted in a mature system whose capabilities can now support a new programme of experiments in Karlsruhe.